INSTALLING A SEPTIC SYSTEM IN MIAMI

Placement of the tank on the property must be determined. A home inspector can help determine the distance required from the house, property lines, and water frontage-etc. A field bed will also be required. This is the place where the waste water can be filtered. It has to be a size that will properly correspond with the size of the septic tank. It also needs to be composed of the proper soil or sand. Make sure that you do not forget to get the proper construction permits or all your efforts will be wasted.

Once you have made the measurements, make sure that you have an inspector double check everything before you begin. An inspector will request that a “perc test” be done. This test is performed in order to see how long it takes for water to filter through the soil. This will determine if anything has to be added to your soil to prepare it for the system. Once the ‘perc test’ is approved, the time to dig has finally arrived.

Unless you have had experience installing a Miami septic system, you should hire a professional to come to your property to dig the hole for the Miami septic tank. Once the hole has been dug, the septic tank is to be lowered into the hole, making sure it is level by shoveling in a bit of rock or gravel to firm the base into place. At the same time, have the field bed dug out to the specifications established by the inspector.

Now it is time to lay out the PVC pipe that will connect your homes plumbing system to the septic tank. Make sure that all of the connections are tight so that there are no leaks. Once the system is connected and fully sealed, test your work by flushing the toilet to see if there are any signs of leaks. Depending on your municipality rules, you may be required to have another inspection.

In case you need assistance regarding Septic Inspections Service, don’t hesitate to get in touch with our proficient team at United SEptic & Grease Services.